Kohler Loure K-123L36-SANL-CP Instrucciones De Instalación página 9

5. Install the Control Box
NOTE: Verify that the hose will reach the supply stop by attaching the flex hose to
the control box inlet.
Verify that the sensor cable is below the countertop.
Unthread the control box screws to remove the cover.
Position the control box over the hole for the spout tube and sensor cables.
Drill 1/8" (3 mm) pilot holes.
Use the standard wall anchors (provided) depending on your wall material.
Feed the spout tube and sensor cables through the slot in the control box.
Attach the control box to the wall with the arrow pointing upward. Secure with
the two screws (provided).
Kohler Co. 9
1386433-2-B