KUKEN 34342 Manual Del Usuario página 18

Press the change button
The button lights stabilize when the machine heats up, the heating time is
approximately 45 seconds.
Press the lungo coee button, wait for the appliance to complete the rinse.
- Before pressing the button, make sure that:
- the handle is closed without a capsule inside.
- the water tank is full.
- the water tank is firmly in place, otherwise the water may leak
- a large bowl (size 250ml or greater) is placed under the dispenser.
press the lungo coee button to start rinsing.
- Open the handle when the rinsing process stops automatically.
Suggestions: the machines have a dierent adapter for the dierent capsules,
please see below
Para cápsuas
NESPRESSO
Para cápsuas
DOLCE GUSTO
Para
CAFÉ EXPRESO
NESPRESSO CAPSULE
1. Open the upper handle
and take out the adapter
for Nespresso capsules,
pull out.
2. Press the lid of the
lid of the processing basket
Insert a capsule in
the preparation basket.
3. Push the preparation basket
with the capsule. Close the handle.
It usually performs.
4.Place a cup under the
dispenser. Press the button
desired coee only once
The selected button will flash and
the machine will begin to prepare,
then complete the process
preparation, the dispensation
it will stop automatically when reaching
the default preparation time
(16 seconds for short espresso,
cafe lungo 25), the configuration
default can be programmed,
see "how to prepare the hour" instruction.
Lift the lever and remove the adapter to insert the capsule to be used.
Suggestions: when you press the button, maybe the LED of the desired button
blink a few seconds first, then start preparing. the process of
flash is for heating, this is normal.