MetaOptima MoleScope II Manual Del Usuario página 41

Guidance and manufacturer's declaration – electromagnetic immunity
The device is intended for use in the electromagnetic environment specified below.
The customer or the user of the device should assure that it is used in such environment.
Immunity test
Electrostatic
discharge (ESD) acc.
to IEC 61000-4-2
Electrical
fast transient / burst
IEC 61000-4-4
Surge IEC 61000-4-5
Voltage dips, short
interruptions, and
voltage variations on
power supply input
lines IEC 61000-4-11
Power frequency
(50/60 Hz)
magnetic field IEC
61000-4-8
Conducted RF IEC
61000-4-6
IEC 60601 Compliance
test level level
± 6 kV ± 6 kV
contact contact
discharge discharge
± 8 kV air ± 8 kV air
discharge discharge
Not Applicable Not Applicable
Not Applicable Not Applicable
Not Applicable Not Applicable
3 A/m 3 A/m
Not Applicable Not Applicable
Electromagnetic environment
- Guideline
Floors should be wood,
concrete or covered with
ceramic tiles. If floors are
covered with synthetic
material, the relative humidity
should be at least 30%.
Not Applicable
Not Applicable
Not Applicable
Power frequency magnetic
fields should be at levels
characteristic of a typical
location in a typical
commercial or hospital
environment.
Not Applicable
41