Gpib Ieee-488 (Optional) - Keysight 34450A Guia Del Usuario

The connecting diagram and setup procedure are shown in
connector diagram
RS232 Protocol
Figure 1-19

GPIB IEEE-488 (Optional)

The GPIB interface is a bus structure that links the multimeter to a host computer
or other GPIB controlled instruments to form an automated measuring system.
It can be used to connect up to 15 devices on one continuous bus, star, or linear
bus network.
In order to operate the meter via a host computer or terminal, the parameters in
the GPIB interface within the meter has to match the parameters in the GPIB
interface provided by the host or terminal.
The default factory settings are address 22.
Keysight 34450A User's Guide
and "RS232 utility sub-menu"
Serial-to-RS232 adapter (34450A-700)
Instrument
TX
RX
GND
TRIGGER IN
TRIGGER OUT
Serial Serial
Interface Interface
Male Female
Serial interface connector diagram
on page 72 below.
Red
1
2
Yellow
3
Grey
4
5
Getting Started Tutorial
Serial interface
PC
1 DCD
2 RX
3 TX
4 DTR
5 GND
6 DSR
7 RTS
8 CTS
9 RI
DB9
DB9
Male
Female
1
47