GYS PTI PRO - 220 V Manual De Instrucciones página 19

DESCRIPTION OF THE G CLAMP
3
1- Arm locking/unlocking lever
2- Cooling pipe
3- Gyroscope
4- Pneumatic body
5- Over-opening electrode
Clamp opening : push the button (FIG 2 - 10), the opening of the clamp can be released. The electrode retracts in the clamp leaving a space of
80 mm to access the welding area instead of 20 mm when not in use.
DISMANTLING THE PTI-S7 HARNESS
Disconnect the power supply to the PTI-S7.
1
2 Remove the two screws from the protective casing.
3 Remove the three nuts from the terminal block.
PTI-PRO RENOV CABLE
2
4 1 5 6 7
6- Mobile arm
7- Side handle
8- Remote settings button
9- Spot welding button
EN
8 9
19