Intended Use; Technical Description - Dometic MPC 01 Plus Instrucciones De Montaje Y De Uso

MPC01 Plus
5

Intended use

Dometic MPC01 Plus (ref. no. 9102500075) is a system for the control, distribution and manage-
ment of voltages in mobile homes, caravans or other extension vehicles.
The CI-BUS interface can typically be used to monitor the charge status of multiple batteries or an
MCA battery charger.
6

Technical description

6.1 Function
MPC01 Plus consists of a display, a control box and accessory parts such as temperature sensors
and tank probes. The current status information for each battery connected via a battery sensor
appears on the display: Current, voltage, remaining charge time of all connected batteries.
Included with the MPC01 Plus is one battery sensor for connecting one battery. To connect more
batteries you need additional battery sensors (item no. 9102500038) (accessories).
MPC01 Plus enables the charge status of the starter battery and up to two supply batteries to be
monitored. To do so, the battery sensors are connected to the negative pole of the batteries. The
information read out from them is transmitted to the display via the CI bus interface. The battery
sensors measure the voltage, current and temperature of the connected battery. Along with the
battery sensor supplied, up to two more battery sensors (accessories) can be connected.
The control box of the MPC01 Plus has 17 outputs for connection and control of 12 V consumer
units (e.g. step, tent light, refrigerator, side light) and universal 12 V outputs.
These outputs are protected against short circuit or overcurrent via 7 fuses.
The battery charger is connected to the control box via the CI bus interface.
MPC01 Plus features a display mode, and a stand-by mode which is activated after a preset
interval.
EN
Intended use
11