TFA 31.5009 Instrucciones De Uso página 10

TFA_No. 31.5009_Anleitung 06.11.2018
AIRCO NTROL COACH – CO Monitor
2 2
3. Range of application and all the benefits of your new instrument at a glance
• For monitoring the CO concentration in buildings, where people are present, eg: schools, offices, public
2
facilities
• Indication of actual CO concentration and history value of the last 24 hours
2
• Multi-function display illumination in different colours
• Indication of time, temperature and humidity
• Micro USB port (5V) to power via PC or power adapter
4. For your safety
• This product is exclusively intended for the range of application described above. It should only be used
as described within these instructions.
• Unauthorized repairs, alterations or changes to the product are prohibited.
Caution!
Risk of electrocution!
• Connect the device via the USB cable only to a suitable USB power source such as a computer, USB
power adapter (DC 5V ≥300mA).
18
16:57 Uhr Seite 10
AIRCO NTROL COACH – CO Monitor
2 2
• The device and the USB cable must not come into contact with water or moisture. Only suitable for
indoor use.
• Do not use the device if the housing or the USB cable are damaged.
• Operate the device out of reach of persons (including children) who cannot fully appreciate the potential
risks of handling electrical equipment.
• Unplug the device if any fault occurs or if the device is not used for a long period of time.
• Route the USB cable lead so that it does not come into contact with sharp-edged or hot objects.
Important information on product safety!
• Do not expose the device to extreme temperatures, vibrations or shocks.
• To avoid damage to the electronics, do not remove the protective cover or insert sharp object through
the ventilation slots.
EMC/RFI
• Protect the unit from EMI (Electro Magnetic Interference) from induction heaters, microwave ovens and
Electro Static Discharge. Readings may be affected if the unit is operated within a radio frequency elec-
tromagnetic field strength of approximately 3 volts per meter. The performance of the instrument will not
be permanently affected.
19