Beta 1956 Instrucciones página 8

INSTRUCTIONS FOR USE ISTRUZIONI PER L'USO
PERSONAL PROTECTIVE EQUIPMENT TO WEAR WHILE OPERATING TOOL
ALWAYS WEAR HEARING PROTECTION WHILE OPERATING TOOL.
ALWAYS WEAR EYE PROTECTION WHILE OPERATING TOOL OR PERFORMING
MAINTENANCE JOBS.
ALWAYS WEAR PROTECTIVE GLOVES AGAINST PHYSICAL AGENTS WHILE
OPERATING TOOL. WEAR ANTIVIBRATION GLOVES FOLLOWING A SPECIALLY
CONDUCTED SURVEY OF LEVEL OF DAILY EXPOSURE OF HAND-ARM SYSTEM
TO VIBRATION.
ALWAYS WEAR SAFETY SHOES.
ALWAYS WEAR EYE PROTECTION WHILE OPERATING PNEUMATIC TOOL
OR PERFORMING MAINTENANCE JOBS.
ANGLE GRINDER USE AND CARE
- Do not use the angle grinder if the switch does not work properly. If the tool cannot be controlled with the switch, it is dangerous
and must be repaired.
- To prevent the angle grinder from starting accidentally, disconnect the plug from the power source before making any
adjustments, changing any accessories or replacing it.
- Check whether any moving parts are misaligned or jammed, any parts are broken and any other condition that might affect
operation.
- Do not use the angle grinder if damaged.
- Use a clamping device or a vice to secure the workpiece, if need be.
from being directed at the operator.
neither damaged nor worn.
- Make sure that no other people are near the tool.
- Only use grinding wheels suitable for the required job, like:
- grinding wheels for smoothing metal, wood or stone surfaces
- grinding wheels for removing burrs from metal
- grinding wheels for cutting metal, wood or stone.
-
•
• the cutting wheel gets jammed in the workpiece.e
8
EN I