Access To Measurements And Personalization Data; Main-Output Personalization; Voltage-Threshold Personalization; Ups-Sensitivity Personalization - MGE Evolution 650 Manual De Instalacion Y Uso

E N G L I S H

Access to Measurements and Personalization Data

Insert the Solution-Pac CD-ROM in the drive.
◗
On the first navigation screen, select "Point to Point solution" and follow the instructions on how to install
the Personal Solution-Pac software.
◗
Then select "Settings", "Advanced settings" and "UPS settings".
Note that the Linux/Unix/MacOS versions of Personal Solution-Pac software do not offer this possibility.
It is possible to modify the settings listed below (detailed comments are available in the Personal Solution-
Pac software).

Main-output personalization

Function
Output voltage on battery power
Overload alarm threshold

Voltage-threshold personalization

Function
High threshold for transfer to battery 151 Volts AC +3%
Low threshold for transfer to battery 89 Volts AC +3%
Fader activation threshold
Booster activation threshold
Maximum input-voltage range

UPS-sensitivity personalization

Function
UPS-sensitivity level
86-81700-00 A01
All manuals and user guides at all-guides.com
Factory Setting
120 Volts AC
105%
Factory Setting
132 Volts AC +3%
102 Volts AC +3%
Disabled
Factory Setting
Normal
Access to Measurements and
Personalization Data
Other available settings
100/120/127 Volts AC
30/50/70%
Other available settings
141 to 153 Volts AC
80 to 94
Volts AC
127 to 138 Volts AC
92 to 108
Volts AC
Enabled
Other available settings
High or low
4 — 1