FEATURES
FRONT
1
2
3
FRONT
1. Carry Handle
2. On/Off Switch
3. Dirty Water Tank
4. Clean Water Tank
5. Clean Water/Solution Tube
ACCESSORIES*
13
13. 3 inch Stain Cleaning Brush
14. 6 inch Stair Cleaning Tool
15. Battery Powered Oscillating Hand Tool
* Attachments may vary between models
All manuals and user guides at all-guides.com
BACK
6
7
4
8
5
9
10
BACK
6. Lid Release Latch
7. Spray Nozzle
8. Solution Dispense Button
9. Power Cord
10. Attachment Hose
11. Hose Wrap
12. Quick Release Cord Hooks
15
14
5
WARNING: USE ONLY DIRT DEVIL
EXCESSIVE FOAMING. EXCESSIVE FOAM WILL CAUSE THE FLOAT TO SHUT OFF THE VACUUM
PREMATURELY. USING OTHER SOAPS WILL VOID YOUR WARRANTY.
FILLING CLEAN WATER TANK
1.
LID RELEASE
LATCH
12
Press down on the Lid
Release Latch and tilt lid
towards front of cleaner
11
to access the tanks.
4.
Replace Clean Water Tank cap and tighten firmly.
Return Clean Water Tank to cleaner (Diagram 4).
Close lid making sure that the Lid Release Latch
clicks into place (Diagram 4a).
NOTE: Always turn off appliance before connecting or disconnecting attachments.
CONNECTING ATTACHMENTS
1.
Connect desired attachment by pressing
tool onto the end of the attachment hose
until the locking button snaps into the
hole. WARNING: Keep spray pointed
away from face. Failure to do so may
result in personal injury.
HOW TO OPERATE
®
CARPET AND RUG SHAMPOO. USING OTHER CLEANING SOLUTIONS MAY CAUSE
2.
3.
Remove Clean Water
Unscrew cap and fill Clean Water Tank with solution
Tank by pulling up and
up to the Soap Fill Line (Diagram 3). Fill the rest of
out of cleaner.
the Clean Water Tank with hot tap water up to the
Water Fill Line (Diagram 3a). IMPORTANT: DO NOT
USE BOILING WATER.
4a.
ATTACHMENTS
2.
LOCKING BUTTON
To remove, press down on
the locking button and
pull the tool away from
the hose.
6
3a.