Troubleshooting - Krups BeerTender VB45 Manual De Instrucciones

English

TROUBLESHOOTING

Problem Possible causes
The appliance does not The appliance is not
come on. connected to the mains
power supply.
The upper part of the The Beertender
dispensing head is not
tap has been activated
properly positioned. by hand.
The Beertender
tap or tube is not
inserted correctly.
No beer is being
The Beertender
dispensed. is empty.
There is no keg inside
the Beertender
appliance.
The Beertender
appliance tap handle is
not correctly installed/
positioned.
You cannot close The upper part of the
the upper part of the dispensing head was
dispensing head. improperly positioned.
14
Remedies
Connect the appliance
to the power supply.
Keg Put the Beertender
® ®
Keg tap back in its
original position.
Keg Remove the
®
Beertender Keg tap
®
from the appliance and
fit it again following
section: Using the
Beertender .
®
Replace the
Keg
®
Beertender Keg with a
®
new one.
Install a keg inside the
Beertender appliance.
® ®
Install/position the
®
tap cover correctly.
Properly position
the upper part of the
dispensing head.
The Beertender The Beertender
®
appliance produces Keg has not reached
too much foam when the right dispensing
dispensing beer temperature.
(see also section:
Dispensing beer).
The Beertender
has been shaken.
The tap handle is being
moved too slowly.
The glass is not clean or
was not rinsed in cold
water.
The dispensing nozzle
is dirty.
Beer flows out too The tap handle is not
slowly. open all the way.
The Beertender The Beertender
®
appliance is dispensing has not been chilled
warm beer. for long enough and
is thus not at the right
serving temperature.
The temperature of the
machine exceeds 30°C
and/or the machine
is placed in direct
sunlight.
The appliance heats The Beertender
the beer instead of cooling issue
cooling it
English
Allow the Beertender
® ®
Keg to cool to the right
temperature. You can
rely on the ready-to-
tap light indicator
on the front of your
Beertender appliance.
Wait 4 hours before
® Keg
dispensing beer.
Firmly and quickly pull
the handle down and
forward as far as it
will go.
Use a clean glass that
was previously rinsed in
cold water.
Clean the dispensing
nozzle.
Open the tap
completely.
Keg Allow the Beertender
® ®
Keg to cool long
enough in the
appliance.
Place the Beertender
®
in a cooler place or in
the shade.
has a Unplug the appliance
®
and bring it to the after-
sales center
15