Operating Instructions - brennenstuhl Power Jet-Light ELP 55 Instrucciones De Uso

060910 Jet Light ELP 55:032210 Arbeitsleuchte ELP 55
Power Jet-Light ELP 55
Introduction
Please read these operating instructions carefully and completely before use.
They are part of your product and contain important information concerning its operation
and handling. All precautions are to be observed when using this product. Check that the
voltage is correct before starting. If you have any questions or want to clarify some
uncertainties, please contact your dealer or service center. Please retain these
instructions and pass them on to third parties if necessary.
Intended use
This splash-proof work lamp is suitable for both interior and exterior use. With its power
cord with plug, it is ready for connection. The polycarbonate cover is impact-resistant.
The lamp can be installed and placed onto all normally inflammable surfaces. It also
serves as power distrubution by using the socket outlets on the backside.
Any other use than the above mentioned or any modification is not permitted and can
result in damages. In addition it can lead to further perilous risks and injuries as well as to
technical malfunctions (such as short circuits, fire, electric shock, etc.).
Package contents
Immediately after unpacking, the package contents must be checked for completeness.
Furthermore, check the unit itself for proper condition.
1 Flat lamp, model ELP 55

1 Operating Instructions

Technical data
Nominal voltage:
Max. load:
Illuminant:
Power input:
Protection rating:
Type of protection:
295mm
295mm
313mm
6
220-240 V~ 50 Hz
3500 W
55 W; GR10q
approx. 1.8 m H07RN-F 3G1.5
I
IP54
83mm
92mm
06.08.10 7:50 Uhr
Operating Instructions
Seite 6