Setting Up The Screen And Projector - NEC WT600 Guia De Instalacion

1. Setting Up the Screen and Projector

1. Refer to "Throw Distance (C)" in the diagram and use a distance between the screen
and projector that corresponds to the screen size.
As an example, when projecting to a 60" screen, set the projector with a separation of
approximately 10.4"/26.3 cm from the screen.
2. Refer to "Height (D)" below and adjust the screen height, or adjust the height of the
projector stand.
As an example, when projecting to a 60" screen, adjust the height from the bottom surface
of the projector to the lower edge of the screen to approximately 19.0"/48.2 cm.
Screen size
(inch)
40
45
50
55
60
65
67
70
72
75
78
80
84
85
90
95
96
100
Screen center
Back of
projector
NOTE
• There is a tolerance of +5% because of design values.
• The projection distance and the lower edge of the
screen are calculated using a 4:3 aspect ratio.
E-4
Height (B)
mm inch
659 25.9
729 28.7
799 31.5
869 34.2
939 37.0
1010 39.7
1037 40.8
1080 42.5
1107 43.6
1149 45.2
1191 46.9
1219 48.0
1275 50.2
1289 50.7
1359 53.5
1428 56.2
1443 56.8
1499 59.0
B
D
Projector
C
foot
Throw distance (C)
mm inch
64 2.5
114 4.5
164 6.4
214 8.4
263 10.4
313 12.3
332 13.1
362 14.3
381 15.0
412 16.2
441 17.4
461 18.1
500 19.7
510 20.1
559 22.0
609 24.0
619 24.4
659 25.9
120
100
80
60
40
20
0
0 100 200 300
Throw distance C (mm)
120
100
80
60
40
20
0
0 5 10
Throw distance C (inch)
Height (D)
mm inch
354 13.9
386 15.2
418 16.5
450 17.7
482 19.0
514 20.2
526 20.7
546 21.5
558 22.0
577 22.7
596 23.5
609 24.0
635 25.0
641 25.2
673 26.5
704 27.7
711 28.0
737 29.0
400 500 600 700
15 20 25 30