Product Structure - Chef CHP63MS Manual De Usuario

SET UP & USE

PRODUCT STRUCTURE

Structural diagram of float valve
Tips:
1. Confirm that the float valve, block proof cover and seal ring are correctly installed
before use each time;
2. Before putting the inner pot into the cooker each time, please remove the dirt and
water from the external side of the inner pot and internal side of the external pot;
3. Please move the product using the base handles of the cooker body;
4. Please remove water from the housing cover with cloth.
Note:
1. Exhaust valve: Pull out the exhaust valve from the lid. Clean the exhaust valve and
float valve of the lid with brush and cloth at least once a month.
2. Sealing gate: Please remove oil and dirt from the sealing gate with detergent and
brush. The remaining oil and dirt in it may appear yellowish. After washing, it may
recover to the original color as stainless steel. It is suggested to clean the sealing
gate once every 2 months.
3. Condensation collector: After cooking, the steam may build up in the condensation
collector as water. Water in the collector should be removed using a clean cloth to
avoid odors.
Page 7