Technical Data; End Effector - BINAR NEO 30 Informacion General

ENGLISH

Technical data

Height
Width
Depth
Weight
Max lifting capacity
Max lifting frequency at 20°C and 500 mm
stroke:
• At 10 kg
• At 20 kg
• At 25 kg
• At 30 kg
Vertical working area, stroke length
Max Lifting speed
Lifting strokes on one charge
Ambient operating temperature
Relative Humidity
Protection class
Machinery grouping according to FEM
9.511
1. A maximum of one third of the permitted lifts per hour can be used in one se-
quence, the restriction is to prevent the lifting device to get warm or overheated.
2. If the NEO 30 is colder than the ambient air temperature, it can cause condensation
and temporary malfunction.

End effector

The customer has the right to put their own end effectors on their NEO 30 either with
the enclosed quick coupling or use two bolted joints if a permanent attachment is
preferred.
This Declaration of conformity does not apply to end effectors not manufactured by Bi-
nar Handling AB.
410 mm
132 mm
121 mm
7,5 kg
30 kg
• 200 lifts per hour
• 90 lifts per hour
• 70 lifts per hour
• 50 lifts per hour
1,4 m
Ca 0,50-0,25 m/s depending on load
Ca 500-200 depending on stroke length
and load
0°C – +40°C
Max 80% (Non condensating)
IP20
1D
m
General information and safety
1
1
1
1
2
11