Uspa UB-6635R Instrucciones Para El Uso página 12

User setting
- Each button can save 2 settings (Cleansing and Bidet).
- Press User 1 and "Cleansing" or "Bidet" consecutively. Then choose nozzle position by pressing FRONT/REAR buttons and water
pressure level by pressing LOW/HIGH buttons.
- Press User 1 again to save, with a beep that will confirm the chosen setting.
( The same applies for saving User 2 settings).
USER 1 USER 2
- To recall previously memorized settings, press User 1 or User 2 during "Cleansing" or "Bidet" functions.
Side control buttons
- It is possible to use the device through side control buttons when the remote control is broken or its batteries are dead.
- Press "Cleansing" on right side or "Bidet" on left side to activate the corresponding functions.
- Press again the button to stop the functions.
- Do not press the buttons with sharp-edged objects.
Cleansing/Stop
Right side
10 10
10
10
CLEANSING NOZZLE POSITION
BIDET NOZZLE POSITION
Left side
WATER PRESSURE
WATER PRESSURE
Power Bidet
AERATED SPRAY
USER 1
AERATED SPRAY
USER 2