Work Light; Cleaning And Maintenance; Technical Data; Disposal - Batavia MAXXPACK BT-CDA001 Manual De Usuario

English
through a suitable piece of hose for
handling.
Please keep in mind that the content of a
drain is infectious and may contain caustic
drain cleaners. Wearing safety glasses and
a mouth or face protection is mandatory!
WARNING: If the device does not perform
as outlined in this manual, turn to the Bata-
via customer service or to a competent
professional.

8. Work light

The work light (7) illuminates the working
area during operation.
When the trigger switch (4) is pressed the
work light (7) turn son. When the trigger
switch is released the work light turns off
after approximately five seconds.

9. Cleaning and maintenance

WARNING: Remove the battery before car-
rying out any maintenance/cleaning of the
tool.
Cleaning
9.1
• Clean the flexible shaft with warm water
and some detergent and allow it to fully
dry in extended condition. After drying
lightly oil the flexible shaft.
• Use only a moist cloth to clean the unit.
Do not use aggressive chemicals which
may dissolve plastic parts, or abrasives.
Always keep the ventilation slots clean
and free from obstructions.
• Keep safety devices, ventilation open-
ings and the motor housing as free as
possible from dirt and dust. Rub the
electric power tool with a clean cloth or
blow over it with low pressure com-
pressed air.
• We recommend that you clean your
electric power tool immediately after
each use.
• Clean the electric power tool regularly
with a damp cloth and somewhat soft
soap.
Maintenance
9.2
There are no inner parts of the tool which
need maintenance.
8

10. Technical data

No load speed . . . . . . . . . .0 – 560 min
Dredging capacity . . . . . . . ø 19 – 50 mm
Length of flexible shaft . . . . . . . . . . 7 m
Working length . . . . . . . . . . . . . . 6.8 m
Diameter of shaft / shaft head. ø 7 / 12 mm
Product weight without battery . . . 3.46 kg
Product dimensions. . . . . 40 × 17 × 20 cm
Sound pressure level L
Uncertainty K . . . . . . . . . . . . . . . 3 dB
pA
Sound power level L
Uncertainty K . . . . . . . . . . . . . . 3 dB
WA
Hand arm vibration . . . . . . . . . 2.3 m/s
Uncertainty K. . . . . . . . . . . . . .1.5 m/s
IP class . . . . . . . . . . . . . . . . . . . IP43

11. Disposal

Do not dispose of electric power
tools with domestic refuse.
The electric power tool is shipped in
packaging to reduce transport damage.
This packaging is a raw material and as
such can either be reused or can be fed
back into the raw material cycle. The elec-
tric power tool and its accessories are
made from various materials such as met-
als and plastics. Take defective compo-
nents to a special refuse collection point.
Ask about these at your specialist shop or
local council. The product and the user
manual may be subject to changes. Techni-
cal data may be changed without prior
notice.
Batteries
11.1
Think of the environment when disposing of
batteries. Contact your local authorities to
find out where your nearest disposal area is.
Do not dispose of batteries with domestic
refuse.
Do not dispose of by burning, risk of
explosion.
. . . . . 69.8 dB(A)
pA
. . . . . . 80.8 dB(A)
WA
-1
2
2