Descargar Imprimir esta página

Technical Information; I Nstall Ati On Co N Side R Ation S - Axor Montreux Showerpipe 16572 1 Serie Instrucciones De Montaje

Ocultar thumbs Ver también para Montreux Showerpipe 16572 1 Serie:

Publicidad

T EC H N I C A L IN F OR MATIO N
Water pressure
Recommended
Max.
Hot water temp.
Recommended
Max.
Flow rate
16572xx1
16574xx1
* Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.

I NSTALL ATI ON CO N SIDE R ATION S

I ns p e ct t he produ ct be fore in s tal lation .
C laim s fo r sh ippin g d amag e made af te r
ins tal lat io n will n o t be h on ore d.
⁄ For best results, Hansgrohe recommends that this unit
be installed by a licensed, professional plumber.
⁄ Please read over these instructions thoroughly
before beginning installation. Make sure that you
have all tools and supplies needed to complete the
installation.
⁄ The installation dimensions shown in this installation
instruction are ideal for people of approximately
6' in height. The dimensions can be changed if
required. In this case, the minimum ceiling height
of 93⅛" from the standing surface, and all other
measurements, must be changed.
⁄ The installer must ensure that the entire area of the
wall to which the mounting plate is to be mounted,
is flat (no protruding grout joints or tiles). He should
also make sure that the wall is strong enough to sup-
port the showerpipe.
⁄ The enclosed screws and anchors are suitable for
a solid surface wall. If installing in a fiberglass or
2
15 - 75 PSI (0.1 - 0.5 MPa)
145 PSI (1 MPa)
120°-140° F (49°C - 60°C)*
158°F (70°C)*
2.0 GPM (7.6 L/min) max.
1.8 GPM (6.8 L/min) max.
E N G L I S H
acrylic shower unit, install header boards at the
mounting points.
⁄ The mixer is equipped with check valves.
⁄ The thermostatic mixing valve is for use with shower-
heads rated at 1.3 GPM (4.9 L/min) or higher.
⁄ To prevent scald injury, the maximum output tem-
perature of the shower valve must be no higher than
120°F (49°C). In Massachusetts, the maximum
output temperature can be no higher than 112°F
(44°C).
The s hower a r m i s int end e d onl y t o h o ld
t he sh ower h ead . D o not lo ad it down
w it h ot her ob je c t s.
This shower p ip e is not for use as a g ra b
bar.
⁄ Keep this booklet and the receipt (or other proof of
date and place of purchase) for this product in a
safe place. The receipt is required should it be neces-
sary to request warranty parts.

Publicidad

loading

Este manual también es adecuado para:

Montreux showerpipe 16574 1 serie