Technical Information; Installation Considerations - Axor 10456 1 Serie Instrucciones De Montaje

1⅝"
2⅛"
6⅛"
4⅞"
½"
5⅞"
2⅛"
2⅝"
min. 2¾"
This unit is listed by IAPMO for use in the
US and Canada.
A112.18.1
2
4"
English

Technical Information

Recommended water pressure
Max. water pressure
1"
Recommended hot water temp.
Max. hot water temp
Flow rate - spout
Flow rate - handshower
*Please know and follow all applicable local plumbing
½"
codes when setting the temperature on the water heater.

Installation Considerations

• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thoroughly be-
fore beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
• Protection against backflow is provided by check
valve and an automatically resetting diverter.
• This trim is for use with rough 10452181 (not
included). The rough must be installed and the
finished floor surface completed and made
watertight.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
Tools Required / Outiles Utiles /
Herramientas Útiles
8 mm
15 - 75 PSI
145 PSI
120° - 140° F*
176°F*
4.8 GPM@ 44 PSI
max. 2.5 GPM