Publicidad
T EC HN I C A L I N FO RMATIO N
Water pressure
Recommended
Maximum
Hot water temp.
Recommended
Maximum
Flow rate @ 44 PSI
* Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
I NSTALL ATI ON CO N SIDE R ATION S
⁄ For best results, Hansgrohe recommends that this unit
be installed by a licensed, professional plumber.
⁄ Please read over these instructions thoroughly
before beginning installation. Make sure that you
have all tools and supplies needed to complete the
installation.
⁄ This trim is for use with iBox Universal Plus model
01850181 (not included).
# 46750 001, 46751001 on l y : On l y on e
o u tlet o n t h e iB ox c an b e plu mb ed. The
s eco n d out let m us t be se ale d w it h a
p lug. D o no t use t his tr i m if bot h outlets
a re plum be d.
#46760 001, 46761001 on l y : Bot h
out let s o n t h e iB ox mus t be plu mbed .
D o not u se t h is t r im if on l y on e ou tlet is
pl um bed .
2
15 - 75 PSI (0.1 - 0.5 MPa)
145 PSI (1 MPa)
120°-140° F (48° - 60° C)*
158°F (70° C)*
5.9 GPM (22.3 l/min)
E N G L I S H
⁄ To prevent scald injury, the maximum output
temperature of the shower valve must be no higher
than 120°F (49° C). In Massachusetts, the maximum
output temperature can be no higher than 112°F
(44° C).
⁄ This product is for use with shower heads rated at
1.1 GPM (4.2 L/min) or higher.
⁄ Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
Publicidad
