Publicidad
Idiomas disponibles
Idiomas disponibles
NOK
Disable
Screwdriver
OK ALL
ON/OFF
Disable
Screwdriver
EXTRA FUNCTION
Name
Export to SD
Card
Calibration Tool
CONFIRM MODE
Code
C1
Once external confirmation "GATE"
C2
Twice external confirmation "GATE"
When "OK ALL disable screwdriver"
C3
OFF
Disable screwdriver when error occurred.
1~9
Setting value "1" means the screwdriver will be
locked when an error occurs.
Setting value "2" means when two consecutive
errors occurs will lock the screwdriver.
Setting value "3" means when three
consecutive errors occurs will lock the
screwdriver...and so on. If the tightening status
is OK once, it will be recalculated,
ON: When malfunction signal "NS" happens, it
will disable screwdriver immediately: User need
to press "ENTER" button to deactivate rotation
(For I/O part. But screwdriver can reverse.)
OFF: When malfunction "NG" happen,
screwdriver will not stop it will not affect next
activation. It will provide a warning.
Disable screwdriver when batch completed
ON: Stop screwdriver after batch completed.
Users need to press "ENTER" (For I/O part, it is
OFF: Screwdriver is normal after batch
Export to controller internal setting value(Controller setting, Program
Description
function is on, LCM
will display "C3" after a batch
completed.
1~9
confirm signal)
completed.
Function Description
setting, Screw setting)
Calibration mode
Disable method
External GATE Signal
Trigger once
External GATE Signal
Trigger twice
Panel Enter button/
External CONFIRM
OFF
OFF
51
Publicidad
