EN
distance of at least 60 mm from the ground.
10 Never carry out any maintenance on the ma-
•
chine without first disconnecting from the mains
supply or when it is left unattended or reachable
by children or disables.
11 Periodically examine the mains cable and
•
machine for damage. If any damage is found,
do not use the appliance but contact your ser-
vice centre for repair.
03i WARNING: Do not use the machine if a supply
•
cord or important parts of the machine are dam-
aged, e.g. safety devices, high pressure hoses,
trigger gun.
12 Do not use the appliance for steam cleaning
•
electrical appliances or electric sockets.
13 Once the appliance is plugged in, do not work
•
with wet hands or feet.
14 Do not immerse the appliance in any liquid.
•
15 Do not steam-clean the appliance.
•
16 Service and repairs must be carried out by
•
qualified personnel only. Only use manufacturer
original spare parts for service repair.
17c The electric supply connection shall be made
by a qualified electrician and comply with IEC
60364-1. It is recommended that the electric sup-
ply of this machine should include either a resi-
dual current device that can interrupt the supply
if the leakage current to earth exceeds 30 mA for
30 ms or a device which can test the earth circuit.
18 Ensure that power sockets used ore correct for
•
the machine.
19 Never use the appliance in ambient
•
temperatures below 0°C if it is equipped with a
PVC (H VV-F) cable.
20 The electric cable must be replaced only by an
•
authorised service centre.
25 Do not put your hands close to the steam jet.
•
26 Never obstruct the steam outlet.
•
27 Do not point the steam jet towards people or
•
animals.
28 During use the appliance could overheat if
•
covered.
29 If the appliance is lent to someone else, the
•
instruction manual should also be passed on.
16i This appliance is not intended for use by per-
sons (including children) with reduced physical,
sensory or mental capabilities, or lack of experi-
ence and knowledge.
17iChildren should be supervised to ensure that
they do not play with the appliance.
04i This appliance has been designed for use with
the detergent provided or the detergent speci-
fied by the manufacturer, such as a neutral sham-
poo based on biodegradable anionic surface ac-
tive detergents. The use of other detergents or
chemicals may put the appliance's safety at risk.
23iDo not direct the jet against yourself or others
in order to clean clothes or foot-wear.
21iRisk of explosion — Do not spray flammable
12
liquids.
08i High pressure hoses, fittings and couplings
are important for the safety of the machine. Use
only hoses, fittings and couplings recommended
by the manufacturer. (it is extremely important
to protect these components against damage by
avoiding their improper use and protecting them
against bending, knocks and scratches).
22i To ensure machine safety, use only original
spare parts from the manufacturer or approved
by the manufacturer.
never use the power supply cable or the gun
hose to move it.
SAFETY DEVICE
- Safety valve
- Manostat
- Thermostat.
- The steam hose connections are equipped with a
double safety block .
STARTING UP
When preparing the appliance for use, switch it off
•
and unplug it!
- Fill the tank J with water (fig. 1)
Do not put any kind of detergent or chemical sub-
•
stance in the water tank!
- Fill the tank J
with detergent (fig. 2)
1
- Put (◊,+, -,*) hose on (◊,+, -,*) hole on the tank
(fig. 3)
•
This appliance is designed for use with the deter-
gent supplied or recommended by the manufac-
turer. The use of other detergents or chemicals
may put the appliance's safety at risk!
- Fit the nozzle H
of the flexible hose L in the con-
1
nection H
(fig. 4-5-6)
2
STEAM CLEANING
• Fit the most suitable accessory in the handle of
the flexible hose L.
• Connect the device to a suitable electrical outlet.
• Start vacuuming by pressing main switch B
• Turn on the steam system using switch E and wait
until "steam ready" light D lights up.
• Selection with switch (P)
: INJECTION HOT WATER
_
: DRY STEAM
o
: INJECTION DETERGENT
=
- To help the primer of the injection pump, turn
the steam tap F off and press the switch L
- Pre-select the amount of steam using the knob
F located on the appliance. The gauge R indi-
3