Wireless Lan - Canon C1333P Guía De Preparación

En
Configuring the Initial Settings
Fr
De
Specifying the Basic
1
It
Settings
Es
When you turn on the machine for the first time, the Setup
Ca
Guide appears on the operation panel. Perform the initial
machine setup by following the on-screen instructions.
Eu
Operation panel
Pt
El
Da
Nl
No
Sv
1.
Select the language, the country or region,
Fi
and then the time zone.
Ru
2.
Set the current date/time.
Uk
Lv
Specifying the Security
2
Lt
Settings
Et
To prevent unauthorized access to the machine, set access
Pl
restrictions for Remote UI.
Cs
What is Remote UI?
Sk Remote UI allows you to use your computer's Web
browser to check the machine's operating status
Sl
and change settings.
Hr
1.
To use the Remote UI, select <Yes>.
Hu
To continue without using the Remote UI, select
Ro <No> and proceed to step
2.
Bg
To use System Manager mode, select <Yes>.
• Set the System Manager ID and PIN so that you
Tr
can configure the settings for extended functions
and the management of access privileges, etc.
Ar
• To continue without using System Manager
mode, select <No> and proceed to step 5.
Fa
.
3
2
3.
Set the System Manager ID.
Enter any number and then select <Apply>.
4.
Set the System Manager PIN.
• Enter any number and then select <Apply>.
• Re-enter the same PIN on the next screen as
confirmation and select <Apply>.
5.
To use General User mode, select <Yes>.
• Set the PIN to be used by general users to access
the Remote UI.
• To continue without using General User mode,
select <No> and proceed to step
6.
Set the Remote UI Access PIN.
• Enter any number and then select <Apply>.
• Re-enter the same PIN on the next screen as
confirmation and select <Apply>.
Specifying the Network
3
Settings
Specify the settings for connecting the machine to a
network. Before proceeding, check that the computer and
router are correctly connected to the network.
• You cannot use a wired LAN and a wireless LAN at the
same time.

Wireless LAN

1.
Check the router's "SSID" and "Network
key."
SSID
: XXXXXXXXXXXX
Network key
: XXXXXXXXXXXX
2.
To configure the settings, select <Yes> on
the operation panel.
3.
Select the network with a matching SSID.
4.
Enter the password (network key) and select
<Apply>.
.
3