Publicidad
Idiomas disponibles
Idiomas disponibles
− Timer therapy time
− Reverse on load
feature for patient safety
LEVEL :
Stretching in extension
Stretching in flexion
Workout protocol
Comfort protocol
LEVEL :
− EROM repeat extension
− EROM repeat flexion
EMS control
Total therapy time
LEVEL :
Transport setting
New patient
Therapy documentation
Service menu
. Protocol details
model
− You access the different programming
levels by repeated depressions of the
MENU button.
− You select the treatment parameters
with the corresponding parameter
button.
− You change the treatment values with
the +/− buttons and you enable/disable
functions by pressing the corresponding
parameter button again.
− You save the settings by pressing the
STOP button.
With the default settings all special func
tions are disabled.
MENU
Note!
LEVEL : equivalent to level of the
Standard model see: .
LEVEL : equivalent to level
Standard model see: .
n Stretching in extension
With the special "stretching in exten
sion" function the joint will be gently
stretched beyond the extension limit.
MENU
Starting at the middle position the
carriage will first move to the pro
grammed flexion limit and then to the
programmed extension limit.
Subsequently the carriage reverses
moves very slowly back again to the
programmed extension limit display
<= . After that it attempts to stretch the
joint another °, moving even slower
than before display << .
If a high resistance toward the addi
MENU
tional ° is sensed, the reverse on load
function is automatically activated
and the device moves in the opposite
direction.
This stretch cycle is repeated
After that the carriage moves to the
programmed flexion limit and restarts
the stretching in extension cycle.
It is not possible to activate the special
"stretching in extension" and "stretching
in flexion" functions at the same time.
Comfort
Note!
If an extension pause is programmed
when you enable the function, the car
riage will stop for the duration of the
pause each time the maximum stretch
ing value is attained.
n Stretching in flexion
With the special "stretching in flex
ion" function the joint will be gently
stretched beyond the flexion limit.
Starting at the middle position the car
° toward the flexion angle and then
of the
times.
Publicidad
