SPORTSTECH SX600 Manual De Instrucciones página 38

FIG. 4:
The Pedals (#1 L & #1 R) are marked "L" and
"R" - Left and Right. Connect them to their
appropriate crank arms. The right crank arm is
on the right- hand side of the cycle as you sit on
it. Note that the Right pedal should be threaded
on clockwise and the Left pedal anticlockwise.
After power is energized, the resistance is adjus-
ted by the electronic watch.
FIG. 3:
The L type elastic pin (24) to relax and pull
down, then, an adjusting tube assembly (17)
inserted into the main frame assembly (16)
of the pipe between the liner, make it to the
appropriate location, open L type elastic pin
(24) and lock it. Then the handrail assem-
bly (18) is inserted into the adjusting tube
assembly arm (17), the use of 3# within the
six corners of the inner six angle wrench flat
round head bolts (26) of the locking and
locking the locking knob (19).
ATTENTION: YOU SHOULD FIX THE
HANDLEBAR TIGHTLY
Fix the Computer (# 67) onto the Computer
Holder (#18) with 4 bolts (68).connect the
plug (A1 & A2, A3 & A4, A5 & A6),
38