Before First Use - Smeg CB2485U Manual De Instrucciones

BEFORE FIRST USE

You must allow the unit to settle for at least twenty-four hours after transport prior to switching the power on. It is
recommended that you clean the interior of the appliance prior to first use, using a solution of baking soda (sodium
bicarbonate) and warm water and then thoroughly drying the interior. The unit may have an odor to it at first use.
This will disappear as the unit cools.
Please note:
The unit will start with a default set temperature of 5℃ (41℉) for fridge, 2℃ (36℉) for special refrigerator
compartment and -18℃ (0℉) for freezer and work continuously until it achieves the correct temperatures. If the
appliance is switched off, you should allow five minutes before switching it on again to prevent unnecessary strain
to the compressor.
Never store inflammable or explosive items and strong corrosive acids or alkalis in the unit. This fridge cools your
food by making the inner back of the cavity cold. It is normal for frost to build up on its surface; it then turns into
liquid during compressor off-cycles and drains through a small drain at the bottom, where it evaporates harmlessly.
The presence of frosting or moisture at the back is normal.
13