Publicidad
Idiomas disponibles
Idiomas disponibles
Pressure Multicooker Use Instructions
Problem
The rice is only half cooked or
too hard
The rice is too soft
You can occasionally hear
clicking or creaking from the
pressure cooker
Error codes
Error
The display shows E1 The temperature sensor is faulty (cannot
The display shows E2 Faulty temperature sensor (short circuit)
The display shows E3 The operating pressure was not reached
The display shows
E3/4
Cleaning
Never immerse the main unit in water or other liquids.
Allow the pressure cooker to cool completely before each cleaning.
To avoid malfunctions, clean the pressure cooker after each use.
Do not use aggressive detergents, brushes with metal or nylon bristles or sharp or metallic cleaning
objects, such as knives, steel wool and the like. These can damage the surface.
Never insert the main unit and the pressure cooker lid into the dishwasher.
Clean the main unit, condensation water channel and pressure cooker lid with a damp cloth. For
cleaning, remove the valve cover from the cover. Be sure to dry all parts well before use.
Clean the valve cover, the grille and the condensation water container with a household detergent.
The container and the grill can be easily washed in the dishwasher.
Possible reason
Few water
The lid was opened too soon
Too much water
The inside of the main unit is
wet or damp
Cause
be detected)
during the preheating phase
The container has overheated
The temperature is too high because the
container is not inserted
The pressure sensor is faulty
Solution
Regolare il rapporto riso/acqua
Keep the lid closed for another
5 minutes after the cooking
process ends
Adjust the rice/water ratio
Dry the inside of the main unit
and the base of the container
Solution
Restart the pressure coo-
ker. Fill the container with
approximately
water and restart the pro-
cess. If the error persists,
contact customer service
32
750ml
of
Publicidad
