Product Contents; Usage; General; Read And Retain The User Manual - Rothewald 10091785-90 Instrucciones De Uso

FORK SEAL DRIVER

1 | Product contents

Art. No. 10091785-90
1
Fork seal driver
1

2 | Usage

3 | General information

3.1 | Read and retain the user manual

This user manual applies exclusively to the Rothewald fork seal driver. It contains important
instructions on safety and use. Carefully read the user manual, in particular the safety instructions,
before you use a fork seal driver. Failure to observe the guidance in this user manual may result in
10
severe injury or damage to the vehicle. Retain the user manual carefully for future reference. If you
pass the Rothewald fork seal driver on to a third party, be sure to include this user manual with it.
The user manual is based on the standards and regulations applicable in the European Union and
reflects the current state-of-the-art technology. National regulations and laws may also have to be
observed in other countries.

3.2 | Explanation of symbols

The following symbols and signal words are used in this manual.
This symbol/signal word indicates a hazard with a moderate risk,
WARNING!
which, if not avoided, may result in death or serious injury.
This symbol/signal word indicates a hazard with a low risk, which,
CAUTION!
if not avoided, may result in minor or moderate injury.
IMPORTANT! This signal word warns of possible material damage.
This symbol indicates that the packaging and product can be recycled.
This symbol indicates a risk of crushing of your fingers and hands.

4 | Safety

4.1 | Intended use

The Rothewald fork seal driver is a tool used for maintaining motorbikes. The fork seal driver allows
new fork seals to be inserted into the fork tubes cleanly and without jamming. They are available for
standard fork tube diameters of 37, 41, 43, 45, 46/47 and 48 mm.
The fork seal driver is intended solely for personal use and not for commercial activity.
The fork seal driver must only be used as described in this manual. Any other use is considered
improper use and may result in material damage. The manufacturer and supplier accept no liability
for damage caused by improper or incorrect use.
Since this is a product intended for universal use which is not tied to a specific vehicle, it is important
to check that the product can be used appropriately on the motorbike in question without any issues
before using the product for the first time. Attention must be paid to the instructions provided in the
vehicle user manual as well as to the guidelines provided by the vehicle manufacturer.
11