Publicidad
Idiomas disponibles
Idiomas disponibles
EN
38
Step 3
1. Check all components before operating the appliance. Before assembly,
make sure that the gas cylinder valve is in the "OFF" position (see figure A
on the next page).
2. Remove the plastic film from the battery. Unscrew the rubber cap of the
electric igniter and insert the AA battery into the battery compartment.
Make sure the positive (+) terminal is facing the rubber cap. Screw the
rubber cap firmly back onto the battery compartment (see figure B).
3. Place the lava stones in the centre on the top of the fire bowl (see figure C).
4. Do not cover the ignition screen when placing the lava stones in the fire
bowl. Always make sure that the ignition screen is visible. Connect the gas
pressure regulator to the gas bottle (see figure D).
Turn the gas bottle valve clockwise to close the gas supply on the gas
bottle.
Turn the gas pressure regulator coupling clockwise by hand only. Make
sure it is securely fitted.
Publicidad
