Publicidad
Idiomas disponibles
Idiomas disponibles
1. Keep pressing the electric igniter. Simultaneously press the control knob
and rotate it anti-clockwise to the "LOW" position. Continue to press and
hold the control knob to light the burner.
2. Release the electric igniter after ignition. Continue to press and hold the
control knob for another 45 seconds.
3. If ignition does not occur within a few seconds, switch the control knob to
the "OFF" position. Wait 5 minutes and then repeat the ignition process as
described above.
CAUTION
Danger of fi re and injury! If the burner does not ignite when the
valve is open, gas will continue to leak from the burner and may
accidentally ignite, posing a risk of injury.
•
Pay attention to the fl ame height
when the appliance is ignited.
•
The fl ame should be of a yellow/blue
colour and between 5 and 25 cm in
height.
Switch off (extinguish fl ame)
1. Rotate the control knob clockwise to the "OFF" position.
2. Rotate the gas cylinder valve to the 'OFF' position.
3. Allow the appliance to cool down completely before moving it (at least
30 minutes).
Reignite
1. Switch the control knob to the "OFF" position.
2. Wait at least 5 minutes to allow the gas to evaporate completely before
trying to light the burner again.
3. Repeat the steps described in the section 'Switching on (igniting the
fl ame)'.
5-25 cm
EN
41
Publicidad
