Do not use other fixing systems than described in the manual.
4.
Never use the bedside sleeper if it is inclined.
5.
To avoid suffocation risk, always attach the bedside sleeper
6.
to the parents' bed with the use of fixing systems described
in the manual.
There must not be any free space between the lower part of
7.
the bedside sleeper and adult bed's mattress.
Before every use, check the bed fixing system tension. To do
8.
so, try to pull the bedside sleeper away from the parents' bed.
If there is free space between the bedside sleeper and adults'
9.
bed, DO NOT USE the product.
The gap between the bedside sleeper and adults' bed must
10.
not be filled with pillows, blankets and other items.
DANGER! Always completely raise the drop side when not
11.
attached to the adult's bed.
WARNING: To avoid hazards from the child's neck being
12.
caught on the top rail on the side that is next to the adult bed,
the top rail must not be higher than the adult bed mattresss.
WARNING: To avoid the risk of your child being strangled
13.
the attachment system to the adult's bed shall always be kept
away from and out of the crib.
1. Description of parts from the box (see fig. 1):
1.
Carrycot
2.
Mattress
3.
Frame legs (x2)
4.
Support
2. How to assemble
• Connect the support (C) to frame legs (A and B) as showed by arrows in the
figure. Connectors are equipped with locking screw holes (6). To tighten up
screws, use the Allen bolt (7) (see fig. 2).
• Connect the frame of the carrycot to the frame of the base (with two fasteners)
until you can hear a „click" and the frame engages. Next put the mattress (2)
into the crib (see fig. 3).
5.
Supporting belt (x3)
6.
Screw (x4)
7.
Allen bolt
‑ 7 ‑
EN