Lionelo Leonie Manual Del Usuario página 8

• Close the side wall of the crib by lifting the moving upper rail. Connect the
connector of the rail until it engages. Next zip up and cover the connector
(see fig. 4).
• Zip up sides of the crib with the use of side zips (see fig. 5).
3. How to use
How to move crib:
• Hold the rail of carrycot, lift it and push to move the crib. Rear bases of frame
legs are anti-skidding, which prevents accidental movement of the crib (see
fig. 6).
How to adjust height:
• Press the bed height adjustment key and set the desired height. There are 6
height levels available. It is also possible to set various heights on both sides
(see fig. 7).
WARNING: Permissible maximum inclination of the bed is a difference of 2 levels.
Child's head must always be on the higher position.
NOTE! Before you change the height, take the child out of the crib.
Cradle function:
• To change the crib into cradle, take out leg supports and turn upwards (see
fig. 8).
4. How to disassemble
• Take the mattress out.
• Detach side zips of the carrycot and rail zip. Release the protection connecting
the rail and drop the side wall of carrycot. Next secure the rail to the carrycot
base with the use of clasps (see fig. 9).
• To separate the frame of the carrycot from frame of the base, simultaneously
press both buttons on upper tips of the crib.
• To remove covering of the crib for washing, press the key from the internal
side of the frame leg. Next grab and take the carrycot frame out (see fig. 10).
• Unlock the rail protection, detach all zips and remove the covering from the
carrycot.
EN ‑ 8 ‑