Publicidad
Idiomas disponibles
Idiomas disponibles
5. Beside sleeper function
To make use of the bedside sleeper function, it is necessary to prepare the
product for use. To do so:
1.
Detach zips on both sides of the opening side.
2.
Unlock the rail protection and drop the side wall of the carrycot. Next secure
the rail to the base of carrycot with the use of clasps (see fig. 9).
3.
Push the bedside sleeper closer to parents' bed and check height of the bedside
sleeper in relation to mattress (see fig. 11).
NOTE! When using the crib as an bedside sleeper, its height must be identical
on all sides.
4.
Use belts supplied to attach the bedside sleeper to the parents' bed. Lock
the belt buckle positioned on the side o the bed's base. Next carry the belt
from the bottom to the top, around the structure of parents' bed and lock
the buckle on the other side.
5.
Tighten up belts and make sure the bedside sleeper has been properly
attached to parents' bed (see fig. 12).
WARNING! Before every use, make sure there is no gap between parents'
mattress and side wall of the bedside sleeper.
6. How to clean and maintain
• Wash the crib's covering in the washing machine at the temperature of 30ºC.
• Use soft agents.
• Never use a bleach. Do not dry in the sun. Avoid direct sunlight or heat.
• Do not iron or wash dry.
• Every time you wash it, check resistance of fabrics and seams.
• Clean metal and plastic parts with a sponge, lukewarm water and soft detergent.
Never use a bleach.
• Never clean any elements of the crib with abrasive materials, ammonia, bleaches
and alcohol.
• Always store the crib in a dry place to avoid mold. Keep away from sources
of heat and do not store the crib in the sun.
• You can clean the mattress with a wet cloth and natural agents. Hand washing
in water is allowed up to 30ºC
The pictures are for reference only. The real design of products may differ from the
pictures presented.
‑ 9 ‑
EN
Publicidad
