Royal Catering RCPM-7L-PRO Manual De Instrucciones página 27

rotation speed
decreasing
Sudden stop of the
device
The speed selection
knob is not working
Mixer arm is hitting
the kneading trough
NOTE! If the device was not used for a prolonged period of time, replace the
carbon brushes of the motor.
Assembly drawings:
is 2. Maximum
loading capacity of the device
exceeded;
3. Incorrect agitator selected
for the food products mixed
1. Excessive volume of food
products;
2. Excessive
surges;
3. Damaged fuse;
4. Continuous operation time
of the device has been
exceeded
1. The knob is loose;
2. Due to the long operation
time the knob has been
damaged
1. Improper position of the
mixer arm
permissible 2. Reduce the load volume
of the kneading trough;
3. Use the correct agitator
1. Reduce the load volume
of the kneading trough;
power line 2. Check the voltage in the
power supply sockets;
3. Replace the fuse;
4. Wait and then switch the
device on again
1. Regulation of the speed
selection knob assembly
screw
2. Report to the repairman
1. Regulate the arm