Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTION MANUAL
IMBAT
REF. 202296302
INSTALLATION
_____________________________________________________________________________
1. Remove the center pin from the fan. The fixation support must be
screwed onto a flat, firm surface. The fixation location must be able
to support ten times the static weight of the fan.
2. Install the stem vertically, then re-insert the pin firmly.
3. Tighten the two screws to secure the stem, then place the cup in
the correct position.
CUP
4. Put the ceiling cup below.
CEILING
CUP
5. Put the fixing support in the ceiling with screws.
6. Lift the fan and fit it into the bracket. Fix the back panel to the
support with screws.
7. Connect fan to a 230V power. Then check if the fan is working
properly. Use the remote control to check if the fan speed and LED
module are working correctly.
[ EN ]
2
Publicidad
