Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Guide
STEP 7: Pedal installation
1. Take out the left/right pedal assembly ④.
2. Pay attention to distinguish left and right pedals. If they are not installed correctly, crank
threads will be damaged!!!
3. Lock the left pedal assembly ④ into the left crank, and tighten with the box-ended wrench (C)
along the direction indicated by the arrow.
4. Lock the right pedal assembly ④ into the right crank, and tighten with the box-ended wrench (C)
along the direction indicated by the arrow.
5.The illustrations of pedals may differ from the actual product. Please refer to the actual product.
Open-ended wrench (C)
Right pedal assembly ④
Safety tips：
Reverse riding is not recommended, as it is likely to loosen pedals. After reverse riding, check
whether the pedals are locked, in order to avoid safety issues arising from loose pedals.
Screw the pedal into the crank manually first, and then
tighten the pedal assemblies L/R ④ with the open-ended
wrench (C). (Note: The tightening directions for both the left
pedal and the right pedal are towards the head directi on.)
Left pedal assembly ④
Note: Check whether the pedal
straps are tightened before riding.
Tighten them by pulling them down.
Publicidad
