Basic operation
In order to protect the speakers, follow the steps below when turning
on and off the system to which this unit is connected.
Turning the power on
1
Turn the audio source device on.
2
Turn the preamp power on and minimize its
volume.
3
Press the STANDBY/ON button to turn this unit
on.
After turning the unit on, the power indicator will blink blue and
no sound will be output for a few seconds. Wait until the power
indicator stops blinking and stays lit before adjusting the volume
and conducting other operations.
Turning the power off
1
If an audio source device is playing back, stop
playback.
2
Minimize the preamplifier volume.
3
Put this unit into standby.
4
Turn the preamplifier off.
5
Turn the audio source device off.
o To assure safety, always disconnect the power plug from the out-
let when cleaning the unit and when traveling or otherwise not
using the unit for a long time.
13