mamibot EXVAC880 Wisor Manual Del Usuario página 22

Charge Method B:
• Connet the adapter with the DC socket of the charging base, attach
Wisor to the charging base by aligning its charging poles with the charg-
ing poles on the base.
• The LED indicator on the charging base will be slowly flashing green if
power up properly.
Auto Recharge
• Wisor will start to find the charging base automatically for recharge
when the battery power is low or Wisor finished the cleaning work.
• Please keep the charging base connected with the power system, or
Wisor will not be able to find the charging base.
Charging instruction
• Wisor can only use the orignal power adapter and charging base
provided by Mamibot.
• Wisor may not be able to find the charging base quickly, it will
improve the efficiency of finding charging base after working several
times.
• Please charge Wisor for 12 hours for the first time. Both the LED
indicator on the Start/Stop button and Auto charge button will be white.
• Pease let Wisor run out of power at the first use.
• Users can press the Auto Recharge button on Wisor or on the remote
control, or press the Recharge button on APP to order Wisor to find
charging base.
• Please turn off the main power switch if the robot will be out of service
for a long time.
• Please charge Wisor as soon as possible after the battery is used up.
• The battery should be repaired and replaced by the after-sales service
center.
20