Publicidad
Idiomas disponibles
Idiomas disponibles
1.1 WHAT'S IN THE BOX
The box contents are as follows:
Indicator
Power Adaptor (for PS-IN202 only)
Wall Mount Bracket
15 ft cable
This Manual
The indicator is supplied with a 15 ft shielded load cell cable to interface to weigh platform's
load cell(s) or junction box.
1.2 CONNECTING TO THE WEIGH PLATFORM
a. Plug the 4-pin connector into the signal port on the rear panel of the indicator (for PS-
IN202SS you need to mount the bare wires onto the board directly). Wire the bare wires and
shield to the weigh platform's load cell(s) or junction box using the color codes shown below:
RED:
+Excitation
BLACK:
-Excitation
GREEN:
+Signal
WHITE:
-Signal
b. Alternatively, instead of using the shielded load cell cable supplied, a cable may be
assembled with the pin assignments shown in FIG 3:
1.3 CONNECTION TO A PRINTER OR COMPUTER
The indicator contains a standard full duplex RS-232 serial port, designed for connection to
either a PC or a serial printer as shown in FIG 4.
PS-IN202 (SS) Indicator
All manuals and user guides at all-guides.com
Chapter 1
Connections
FIG 3
FIG 4
- 3 -
Publicidad
