Roborock Auto-Empty Dock Manual Del Usuario página 17

Getting Started
Robot Dustbin Replacement
1. Only replace with the Auto-Empty Dustbin
1. Remove the original robot dustbin.
2. Remove the plate covering the air inlet in the robot.
3. Put in the auto-empty dustbin
Make sure the dustbin provided with the robot has been replaced with the auto-
Note:
empty dustbin or it may fail to empty automatically.
2. Auto Emptying
Auto emptying will begin when the robot returns to the auto-
empty dock after cleaning.
3. Manual Emptying
Manual emptying can be performed by pressing the DOCK
button when the robot is being charged on the dock.
Note: Avoid frequent manual emptying.
4. Stop Emptying
Press any button on the robot to stop emptying.
12
MA X