Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
2-Ch 9-Ch Function
Laser color
–
7
(Ch. 8 must be active for
strobe)
–
8
Laser strobe
–
9
Laser rotation
For manual operation of LEDs and lasers using DMX control, set Channel 1 to 000 009.
Configuration (Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX signals
that could interfere with the DMX signals from the controller.
Preset Kinta Effect
To run the Kinta FX ILS with a static preset kinta effect color, do the following:
1. Press <MENU> repeatedly until C-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the desired colors, from C 1–15. (see
4. Press <ENTER>.
Automatic Programs
To run the Kinta FX ILS with an automatic program, follow the instructions below.
1. Press <MENU> repeatedly until P-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the desired program, from P 1–7. (see
4. Press <ENTER>.
5. Use <UP> or <DOWN> to select the program mode, from FAdE (fading) or SnAP (quick change).
6. Press <ENTER>.
Automatic Program Speed
To set the automatic program speed of the Kinta FX ILS, do the following:
1. Press <MENU> repeatedly until S-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the speed, from S. 00–99 (slow to fast).
4. Press <ENTER>.
Sound-Active Programs
To run the Kinta FX ILS with a sound-active program, follow the instructions below.
1. Press <MENU> repeatedly until Snd shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the desired program, from Snd1–7. (see
4. Press <ENTER>.
5. Turn the music on and adjust the sound sensitivity knob until the product starts responding to the
beat of the music.
•
The product will only respond to low frequencies of music (bass and drums).
•
The laser will black out when in Sound-Active mode after 3 seconds of silence or noise
below the sensitivity setting.
Kinta FX ILS User Manual Rev. 5
Value
Percent/Setting
000 009 No function
010 049 Red
050 089 Green
090 129 Red and green
130 169 Red and strobing green
170 209 Green and strobing red
210 255 Red and green alternating strobe
000 009 No function
010 254 Laser strobe, slow to fast
255
Sound-active laser strobe
000 004 Stop
005 127 Counterclockwise rotation, slow to fast
128 133 Stop
134 255 Clockwise rotation, fast to slow
Colors and
Programs)
Colors and
Programs)
Colors and
Programs)
Page 14 of 117
Publicidad
