Finishing The Installation - Hinkley 54 VELO Manual De Instrucciones

FINISHING THE INSTALLATION

Remove the four washers and nuts from mounting bracker,
1
move the motor into position over the four mounting studs and
secure with the nuts and washers previously removed. (Fig. 1)
Raise the motor housing up against the mounting bracket, the
2
four supports inside the motor housing should be placed
against the four studs on mounting bracket, twist the motor
housing clockwise until snug. (Fig. 2)
08 |
hinkley.com
Mounting studs
Washers
Nuts
Fig. 1
Motor
Bracket
Motor
Housing
Fig. 2
Mounting
Bracket
Nuts
Studs
Supports