FRECAN Urban Guia Del Usuario página 52

ASSEMBLY OF PRODUCT
Assemble the cooker hood with the help of the assembly scheme.
1.
Affix the assembly pattern on the wall at the specified height (See the min-
2.
imum and maximum distances intended for the worktop, in the assembly
pattern) and drill holes A, B and C with the dimensions specified in the tem-
plate (Fig. 12).
Insert Ø 10mm wall plugs into the holes drilled as A, B, C, D, and screw
3.
down the 5.5 x 60 screws (9) at the points A + B, in such a way as to remain
5mm space between the screw head and the wall (Fig. 12).
Affix the hanging plates of the cooker hood on the body of the cooker hood
4.
with M5x35 bolt (3) (Fig. 12).
Hang the hood from its hanging plates on the wall at points (A, B). If the
5.
hood is not parallel, position its shape to parallel by tightening or loosening
M5x35 screw (3).
Tighten A + B fixing screws on the wall, and completely secure the product
6.
at point C.
Make the air outlet connection of the product
7.
22
HOOD USER GUIDE
19.12.2018