Assembly Of Sheet Metal Flues - FRECAN Urban Guia Del Usuario

11 ASSEMBLY OF SHEET METAL
FLUES
Fig. 13
1- Inner Flue
2- Flue Connection Plate Fixing
Screws
3- Flue Connection Plate
The outer and inner sheet metal flues
are assembled one within the other.
The cooker hood is set in the midst,
and then the flue connecting plate (3)
is directly affixed to the wall, under the
cover or mark the points E and F. ()
Drill points E and F with Ø6mm drill bit,
and insert Ø6mm and plastic dowels.
Insert the flue connection plate with
3,9X22 screws ().
Affix the inner flue to the flue connec-
tion plate by pulling it upwards
(Fig. 13/2).
19.12.2018

ASSEMBLY OF SHEET METAL FLUES

HOOD USER GUIDE
23