Eva Solo HeatUp Manual De Instrucciones página 4

HeatUp patio heater
UK
Remove all packaging materials from the product
DK
and read the user instructions carefully before using
the patio heater for the first time.
SE
Keep the user instructions for later reference.
NO
IMPORTANT BEFORE USE
Check that the electrical circuit can deliver the required
FI
wattage for the product. At the same time, ensure
that the voltage in the power socket corresponds to
DE
the voltage for which the product is approved (230 V).
Screw the two loose legs tightly onto the patio heater
and then insert the plug into a power socket. Switch
NL
on the patio heater. The on/off button is located above
the back leg of the heater.
FR
Getting started
ES
The patio heater has three heat settings. Press once
for the maximum output (1500 W), once more for
IT
medium output (1000 W) and a third time for lowest
output (500 W).
PL
The patio heater is equipped with an anti-topple safety
switch, which disconnects the power if the patio
heater is tilted to one side. If the anti-topple switch
is activated, the patio heater can be turned on again
using the on/off switch, which when pressed once is on
the maximum heat setting (1500 W).