Working With The Device - ULTIMATE SPEED UPK 10 E2 Instrucciones De Funcionamiento Y De Seguridad

burst and cause serious inju-
ries. Switch the compressor
off before reaching the maxi-
mum permissible pressure.
„
Keep the device in a dry
location and out of the reach
of children.
This helps prevent device
damage and possible
personal injuries that
could result from it:

Working with the device:

„
Do not use the device while
driving the vehicle.
„
Before setup or first use,
check the device for any dam-
age and do not use unless in
perfect working order.
„
Do not expose the device
to rain or wet weather.
Do not let the device come
into contact with water.
Do not immerse the device
in water. There is a risk of
electric shock!
„
Keep all openings of the
device free during operation.
Do not block the openings
with your hands or fingers,
and do not cover the device.
There is a risk of overheating!
„
In hot weather, do not leave
the device in a car. This could
permanently damage the
device.
„
The device becomes warm
during use. There is a risk of
burn injuries from touching
the hot surfaces.
„
Take care to ensure that
sand, dust and other small
foreign objects cannot enter
the air inlet or air outlet
openings.
„
Do not operate the device
near to flammable liquids or
gases. Do not use the device
to draw in hot fumes. Failure
to do so risks causing a fire
or explosion!
„
Switch the device off and
remove the mains plug from
the socket in the following
cases:
– When you are not using
the device;
– If you are leaving the
device unsupervised;
– If you are doing cleaning
work;
– If the connection cable is
damaged;
– If foreign objects have
got into the device or you
notice unusual noises.
„
Only use the accessories
supplied and recommended
by the manufacturer.
GB/IE/NI/CY/MT
11