Descargar Imprimir esta página

Specific Safety Instructions; Using The Device - ULTIMATE SPEED UPK 10 E2 Instrucciones De Funcionamiento Y De Seguridad

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 167
water and seek medical
attention.
z Specific safety
instructions
We recommend charging the
power bank with compressor
once a month.
1
A slightly higher temperature
during charging is
absolutely normal and not
a malfunction. However, we
do recommend leaving the
power bank with compres-
sor
to rest for 15 minutes
1
before using.
Protect the power bank
with compressor
moisture and high tempera-
tures, including fires.
Store the power bank with
compressor
and protect the device from
moisture and corrosion.
If you notice the power bank
with compressor
producing an unusual odour
or looking deformed in any
way, stop using the device
immediately and contact the
manufacturer.
Do not drop the power bank
with compressor
being used.
from
1
in a dry place
1
is leaking,
1
while it is
1
The power bank with
compressor
for use with car tyres. It is not
designed for use with large
tyres like tractor or truck tyres.
During inflation, high temper-
atures can be produced at
the air outlet. There is a risk
of burn injuries!
When using the jump
lead
, ensure that the
18
black plug is securely
plugged into the vehicle
jumpstart outlet
When using the jumpstart,
make sure that all 3 indicator
lights
are lit.
13
If the blue indicator light
goes out during the start
13
attempt, charge the power
bank with compressor
If the vehicle does not
start after the 3
attempt, stop the start process
and check the other causes
that may be preventing the
vehicle from starting.
z Using the device
Note: After switching on the power
bank with compressor
power bank switch
switches off automatically after
approximately 20 seconds if the
GB/IE/NI/CY/MT
is designed
1
.
8
.
1
– 5
Start
rd
TH
with the
1
, the device
9
13

Publicidad

Solución de problemas

loading