the procedure is done, make sure the saddle has been fixed securely. If not, tighten
up the nut on the ring so that the required stability is guaranteed.
3.
Wheels
Pay attention to the front-wheel tread direction – it should be the same as in the
rear wheel. Put the wheel in the fork by sliding one end of the wheel centre into
the dedicated opening. Repeat the procedure with the other wheel centre. Avoid
excessive tilting of the fork! Tighten the screws to connect the wheel centres to
the fork. The grooved side of the pad should be on the side of the frame.
How to use
Sit on the saddle, grab both handlebars grips firmly and push your feet against the ground
alternately. When you get some speed, lift your feet to ride freely. This is how your child
should learn how to keep its balance. To turn, it is necessary to turn the handlebars
in a relevant direction and keep your balance. To brake, feet must touch the ground.
How to maintain and clean
Clean the bike with a wet cloth and wipe it dry. Do not use caustic or abrasive
agents to clean the product.
The product has been tested and complies with the following standards:
EN 71-1:2014+A1:2018, EN 71-2:2020, EN 71-3:2019+A1:2021
The pictures are for reference only. The real design of the products may differ from the
pictures presented.
PL
Drogi Kliencie!
Jeśli masz jakiekolwiek uwagi lub pytania do zakupionego produktu, skontaktuj
się z nami: help@lionelo.com
Ważne informacje
Prosimy o przeczytanie tej instrukcji przed przystąpieniem do obsługi produktu,
‑ 5 ‑
EN | PL