KPS TL300 Manual De Instrucciones página 25

(6) Key of READ
It is used to read the data obtained.
(7) Key of MEMO
It is used to store the data obtained.
(8) Key of Measure
It is used to start or cease a measurement of resistance.
(9) Key of
It is used to select a memory for storage of data obtained.
(10) Key of MAX/MIN/AVG
It is used to switch between the measurement of maximum,
minimum and average.
(11) Key of ENTER
It is used to confirm a storage or reading of data.
(12) REL
It is used to select relative measurement.
(13) Key of
It is used to select a memory for storage of data obtained.
(14) E socket
It is used to connect with the grounding pole.
(15) P/S socket
It is used to connect with the auxiliary grounding pole.
(16) C/H socket
It is used to connect with the auxiliary grounding pole.
4