Physical Description; Technical Description - ACTEON Equipment SATELEC Implant Center Manual De Uso

If you have any doubt, contact an approved
dealer or our customer support department:
- www.acteongroup.com
- E-mail: satelec@acteongroup.com.
III - DESCRIPTION

3. 1 PHYSICAL DESCRIPTION

The I C has the following components:
MPLANT ENTER
- a control unit (Fig. 1),
- a multifunction footswitch (Fig. 8),
- a micro-motor cord with connectors (Fig. 1-2),
- two brackets for irrigation solution (Fig. 1-3),
- an I-S micro-motor (Fig. 1-4),
URGE
- a grounded power cord (Fig. 1-5),
- an LCD (Liquid Crystal Display) screen (Fig. 1-6),
- a control keypad (Fig. 1-7),
- a motor cord connector (Fig. 1-8),
- two peristaltic pump housings (Fig. 1-9),
- a cord connector for the two ultrasonic
functions (Fig. 1-10),
- a cord for N scaler or P
EWTRON
(Fig. 1-11) (according to option),
- a N handpiece or a P
EWTRON
with its cord (Fig. 1-12) (according to option).
All manuals and user guides at all-guides.com
handpiece
IEZOTOME
handpiece
IEZOTOME
Located at the back of the unit are:
- 1 power cord socket with ground pin (Figure 2,
(1)),
- 1 footswitch connector (Figure 2, (2)),
- 1 fan (Figure 2, (3)),
- 2 bracket holders (Figure 2, (4)),
- 1 power switch (Figure 2, (5)).

3. 2 TECHNICAL DESCRIPTION

a) LCD screen/control keypad
The tiltable control keypad (Fig. 3), treated with
an anti-microbial agent, is used to define the
settings of your I
MPLANT
The I C
MPLANT ENTER
reasonable pressure to the keypad buttons.
Button identification (Fig. 3-1 to 10).
- Item 1: Flush/Prime
- Item 2: Increase irrigation flow rate
- Item 3: Reduce irrigation flow rate
- Item 4: Irrigation on/off
- Item 5: Program selection
- Item 6: Store or Confirm (depending on mode)
- Item 7: Reduce value
- Item 8: Selection/displacement
- Item 9: Increase value
- Item 10: Change side
The LCD screen displays the various items of
information needed by the user.
Display and indicator identification
Displays common to all modes:
Display and indicator identification (Fig. 4-11 to
15).
- Item 11: Store or Confirm (depending on mode)
C .
ENTER
is adjusted by applying
7